Cheap 300 blackout brass – Hornady Cases

Product overview of 300 blackout brass 

Top Brass specializes in purchasing once-fired military brass like 300 blackout brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensure the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.

More about the 300 blackout brass for sale

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Product Information 300 blackout brass