Description
Products overview on 45 lc brass:
Premium tumble cleaned 45 lc brass off our indoor shooting ranges ready to ship now! This material has been mechanically sorted 3 times and hand sorted once, it will undergo a final hand sort before packaging to ensure accuracy. Headstamps include but are not limited too Federal, Remington, and Winchester.
We are tumble cleaning this material and as with all of our brass orders we add an additional 2% to the overall weight so you get your money’s worth! Purchase brass from Ammo Marsh knowing it will be clean, properly sorted, and shipped promptly! We give substantial volume discounts on this item, the more you buy, the lower the cost per piece!
pRODUCT information ON 45 lc brass
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
45 lc brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
SPECIAL NOTE ABOUT THIS BRASS:
The .45 Long Colt Blank has the same external dimensions as the standard .45 Colt but utilizes a 0.140″ diameter flash hole to keep the primer from backing out with blanks. FOR BLANK USE ONLY! NOT TO BE LOADED AS LIVE AMMUNITION!!
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.Specifications 45 lc brass once fired
Product Information
| Cartridge | 45 Colt (Long Colt) |
| Finish | Brass |
| Condition | New |
| Quantity | 500 Piece |
| Primed | No |
Delivery Information
| Shipping Weight | 1.640 Pounds |
